Foro Computacion Salta, Tucuman y Jujuy

El foro de computacion, informatica y electronica en Salta, Tucuman y Jujuy

No te has registrado

#1 2013-06-30 18:12:45

DardodeSalta
Member
Registrado: 2009-10-28

VENDO Motherboard ECS A890GXM-A2 (V1.0) Usada y Perfecta!

http://www.ecs.com.tw/ECSWebSite/images/Products/large/A890GXM-A2_580_01a.jpghttp://www.ecs.com.tw/ECSWebSite/images/Products/large/A890GXM-A2_IOa.jpg

Motherboard ECS A890GXM-A2 (V1.0)

CPU º Support AM3 socket for AMD Phenom™ II processors - AM3+
º Support 125W Phenom™ II X6 processors
º High-performance HyperTransport 3.0 CPU Interface
º Support transfer rate up to 5200 mega-transfers per second
º Note: This board supports CPU up to 140W TDP ; you can refer to AMD website to check your CPU.

CHIPSET º AMD® 890GX & AMD® SB850
º North Bridge: AMD® 890GX
º South Bridge: AMD® SB850

GRAPHICS º On Chip (AMD 890GX-based with ATI™ Radeon HD4290 graphics )
º Integrated DirectX10.1 graphics processor
º Share Memory: Maximum up to 512MB
º AMD SidePort Memory : DDR3-1333 (64Mx16=128MB)

MEMORY º Dual-channel DDR3 memory architecture
º 4 x 240-pin DDR3 DIMM socket support up to 32 GB
º Support DDR3 up to 1800(OC)/1600(OC)/1333/1066 DDR3 SDRAM
º *(Due to the DRAM maximum size is 4GB at present, the memory maximum size we have tested is 16GB)
º *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS.
For Windows® 64-bit OS with 64-bit CPU, there is no such limitation

EXPANSION SLOT º 3 x PCI Express Gen 2.0 x16 slots
º 1 x PCI Express x1 slot
º 1 x PCI slot
º *The second PCIEX16 only support bandwidth x4

STORAGE º Support by AMD® SB850
    • 5 x Serial ATA 6.0Gb/s devices
    • 1 x eSATA 3Gb/s port
    • RAID0, RAID1, RAID5, RAID 10 configuration

AUDIO º Realtek ALC892 8-Ch High Definition audio CODEC
º Compliant with HD audio specification

LAN º Dual Realtek 8111DL 10/100/1000 Fast Ethernet Controller

REAR PANEL I/O º 1 x D-sub(VGA)
º 1 x HDMI Port
º 1 x DVI Port
º 1 x Display port
º 2 x RJ45 LAN connectors
º 1 x Audio port (Line-in, Line-out, Mic-in)
º 1 x optical S/PDIF Out connector
º 1 x Clear_CMOS button
º 1 x eSATA 3Gb/s port
º 2 x USB 3.0 ports compatible to both USB 3.0/2.0 devices (blue)
º 4 x USB 2.0 Ports

INTERNAL I/O CONNECTORS & HEADERS º 1 x 24-pin ATX Power Supply connector
º 1 x 8-pin ATX 12V Power Connector
º 1 x 4-pin CPU_FAN connector
º 1 x 3-pin PWR_FAN connector
º 1 x 3-pin SYS_FAN connector
º 1 x Power on button
º 1 x Reset button
º 1 x Speaker header
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 1 x SPDIF out header
º 1 x Clear CMOS header
º 1X Power on LED (Green light)
º 1X Stand by LED (Red Light)
º 5 x Serial ATA 6Gb/s connectors
º 4 x USB 2.0 headers support additional 8 USB ports
º 1 x Chassis intrusion header

SYSTEM BIOS º AMI BIOS with 8Mb SPI Flash ROM
º Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
º Supports ACPI & DMI
º Audio, LAN, can be disabled in BIOS
º F11 hot key for boot up devices option
º Support over-clocking
º Supports eJIFFY
º Supports Page Up clear CMOS Hotkey
º Supports ECS M.I.B III Utility
    • CPU voltage adjustable
    • Memory voltage adjustable
    • NB Chipset Voltage Adjustable
    • HT Voltage Adjustable
    • External Clock Adjustable
    • Multiple Frequency Adjustable by CPU

FORM FACTOR º ATX Size, 305mm*244mm

Una Joya!!
$ 800.-

Modificado por DardodeSalta (2013-06-30 18:14:45)

Desconectado

 

#2 2014-04-29 10:29:12

exequiel2889
Member
Ubicación: Salta
Registrado: 2014-04-28

Re: VENDO Motherboard ECS A890GXM-A2 (V1.0) Usada y Perfecta!

La tenes todavia?

Desconectado

 

#3 2014-04-30 00:17:31

DardodeSalta
Member
Registrado: 2009-10-28

Re: VENDO Motherboard ECS A890GXM-A2 (V1.0) Usada y Perfecta!

exequiel2889 dijo:

La tenes todavia?

Hola Exequiel, la tengo y sale en combo con un micro Phenom ll x6 1090T en 2.800.- Una combinación muy potente.
Saludos.

Desconectado

 

Pie del foro